The architectural lighting covers the structure introduction    >>Return

    Architectural lighting put on it is our company that with numerous scientific research department , is it suitable for building daylighting skylight series of roof to develop but become together for many years. Collect the daylighting , ventilate, Keep insulate against heat , sound insulation and install characteristic such as being convenient in integrative many kinds of superior performance warm.

Whether serial daylighting this put on at material can divide into for the three kind according to high-middle-and-low grading.

shanxixiantangyoudiandashaThe daylighting carrying

 

 一、 Gather the ester daylighting of carbonic acid to cover ( PC )

 1 、 Structure characteristic :

   ① The daylighting covers the frame of pressing as the aluminium alloy
     structure, never get rusty;
   ② It put on daylighting frame of pigeonholing for by unite the egular,
         the more difficult to infiltrate;
   ③ Board , PC of daylighting , for import material while being high-
         quality, have endurance , fire- retardant , transparency high ,
         ageing-resistant time getting long advantage;
   ④ Light, conduct oneself with dignity and lighter than 30kg/m2 wholly
     (including the structure);
   ⑤ The material plasticity of the printing opacity is strong, it is
     flexible to design the form.

 2 、 Physics performance :

   ① Light transmittance of 88% or higher (single) belongs to magnitude 5
        《GB/T 11976-2002》
   ② The air permeability: belongs to magnitude 8  《GB-7106-2008》
   ③ Water leakage sex:belongs to magnitude 5      《GB-7106-2008》
   ④ The heat transfer coefficient: K0 = 2.71 W/m2.k (double) belong to
         magnitude 5 《GB-8484-2008》
   ⑤ The wind pressure strength:Pressure were higher than in level 6
         《GB-7106-2008》
      ⑥ Drop hammer impact performance:3000g/m2, 1.5 m high vertical fall
         not breakdown,not fracture。

 3 、 Suitable occasion: Apply to the senior places that fit up and have safe
    and guard against theft and require,such as hotels and retaurants,bank
    ,etc..

qingdaohuahaibinguanThe daylighting carrying

 

 二、 The lucite daylighting covering ( PMMA )

 1 、 Structure characteristic :

   ① The daylighting covers the frame of pressing as the aluminium alloy
     structure, never get rusty;
   ② It put on daylighting it pigeonhole frame for by unite the regular,the
     more difficult to infiltrate;
   ③ For import board material process and succeed , have transparency high,
     ageing-resistant time getting long advantage while being high-quality,
     PMMA of daylighting;
   ④ Light, conduct oneself with dignity and lighter than 30kg/m2 wholly
     (including the structure);
   ⑤ The material plasticity of the printing opacity is strong, it is
     flexible to design the form.

 2 、 Physics performance :

   ① Light transmittance of 82% or higher (single) belongs to magnitude 5
        《GB/T 11976-2002》
   ② The air permeability: belongs to magnitude 8  《GB-7106-2008》
   ③ Water leakage sex:belongs to magnitude 5      《GB-7106-2008》
   ④ The heat transfer coefficient: K0 = 2.72 W/m2.k (double) belong to
         magnitude 5 《GB-8484-2008》
   ⑤ The wind pressure strength:Pressure were higher than in level 6
         《GB-7106-2008》
   ⑥ Drop hammer impact performance: 500 g/m2, 1.2 m high vertical fall 
         through, fracture phenomenon

 3、 Suitable occasion: Suitable for many kinds of occasions , such as the    hotels and retaurants , workshop factory building ,etc.

beijingfengtaijiaomenshangyetingThe daylighting carrying

 

 三、 The daylighting of glass fibre reinforced plastic (FRP ) is    covered

 1 、 Structure characteristic :

   ① It put on daylighting it have it last frame , turn-ups type method not
     whole,regardless of first line of a couplet is the regular,or by unite
     regular, can up to zero seepage;
   ② Daylighting put on material is it able to bear unsaturated polyester
     printing opacity resin and shorttocut felt it adds to be fine to is it
     make to mix to strengthen glass glass fibre that wait while being high-
     quality to select for use;
   ③ The corrosion-resistant performance of thedaylighting material is other
     printing opacity materials can't be compared, not dazzling when seeing
     through the light softly;
   ④ Light, conduct oneself with dignity and lighter than 35kg/m2 wholly
     (including the structure);
   ⑤ The material plasticity of the printing opacity is strong, exchange
     shaping, it is very flexible to design the form.

 2 、 The material plasticity of the printing opacity is strong, exchange         shaping, it is very flexible to design the form.

   ① Light transmittance of 60% or higher (single) belongs to magnitude 5
        《GB/T 11976-2002》
   ② Transparency is 10% or less, the light is soft, not dazzling
   ③ The air permeability: belongs to magnitude 8  《GB-7106-2008》
   ④ Water leakage sex:belongs to magnitude 6      《GB-7106-2008》
   ⑤ The heat transfer coefficient: K0=1.6 W/m2.k (double) belong to
         magnitude 7 《GB-8484-2008》
   ⑥ The wind pressure strength:Pressure were higher than in level 6
         《GB-7106-2008》
   ⑦ Drop hammer impact performance:1000g/1.2m not breakdown,not fracture。

 3 、Applicable occasions: suitable for workshop building, sports venues,
      etc are not allowed to strong sunshine point-blank daylighting hole
      larger and various occasions.

  Serial daylighting this put on from formal to can be divided into the three forms structure :

   一、 Sphere body: The structure of the spheroid has diversified elasticity, resist and assault of good performancly.

   二、 Sharp awl body: There are arrises that there are angles, the crest line is clearly demarcated , suitable for many kinds     of occasions , such as head canopy of the door ,etc.

   三、 Polyhedron: Make according to customer's request, the modelling is elegant in appearance.


The daylighting of exploration administration of Nanyang of Henan is carried


The daylighting of Tianjin Tanggu developing zone is carried


Bangladesh power plant of Chittagong


  Comparison that three kinds of materials daylighting covers :

    1 、 PC daylighting is covered: High-grade symbol , exceed and is able to bear the waiting , endurance performance , is      commonly called as " mixing the daylighting not rotten and covering ".

    2 、 PMMA daylighting is covered: Masses' suitable type, cover having great difference with PC daylighting in such aspects
         as printing opacity , keeping warm , sound insulation, able to bear shock power to slightly cover in PC.

    3 、 FRP daylighting is covered: The suitable type of economy, the fabrication cost is cheap, the light is soft , able to      bear corrosivity and keep warm performance superior to the former two daylighting put on , easy shaping have, it is      various kinds of complicated polyhedron to shape.

   Compare with, small and propose , for your reference, choose on the basis of your actual conditions       briefly! !

All rights reserved: Beijing jinghua cheng ming Environmental Technology Co. Ltd.

Telephone number :010-87695555 87690555   E-mail: jhfrp@163.com